Shopping Cart
By continuing to browse this website, you agree to our use of cookies and to the processing of your personal data in accordance with the GDPR. View more details
Our website is getting a makeover. Some pages may look different for a few days: orders and payments work as usual.
UPS
Eaton
APC
Vertiv Emerson
HP
Riello
UPS batteries
APC
Compaq
Dell
Eaton
HP
Imunelec
MGE
Powerware UPS's
Riello
Socomec
Trust
Vision
Complete replacement battery kits for Riello Vision UPS: new sealed lead-acid AGM (VRLA) batteries, tested and ready to install with the original connectors.
Batteries for Riello Vision UPS
Why replace the batteries?
- A sealed lead-acid (AGM / VRLA) UPS battery gradually loses capacity, especially in a warm room: its real service life is generally 3 to 5 years.
- Worn batteries greatly reduce runtime, trigger the « battery » alarm and can make the UPS shut down at the very first power cut, exactly when you need it.
- Replacing the batteries restores your UPS's original protection for a fraction of the price of a new UPS.
How to find the right kit?
- Note the exact reference of your UPS on the rating label (on the back or underneath), for example « SEP 1000 » or « VSD 2200 ».
- Compare it with the table below: each kit includes all the batteries of the UPS, in the same format and with the same terminals.
- If in doubt, open the battery compartment and note the number of batteries, their voltage and capacity (for example 12 V 7 Ah), or send us a photo of the UPS and its batteries: we will tell you the right kit.
Available kits
| Model | Internal batteries | Kit contents |
|---|---|---|
| Riello Vision VST 800 | 2 x 12 V 7 Ah | 2 x NP1272F2 (12 V 7.2 Ah) |
| Riello Vision VST 1100 | 2 x 12 V 9 Ah | 2 x HR1234WF2 (12 V 9 Ah) |
| Riello Vision VST 1500 | 4 x 12 V 7 Ah | 4 x NP1272F2 (12 V 7.2 Ah) |
| Riello Vision VST 2000 | 4 x 12 V 9 Ah | 4 x HR1234WF2 (12 V 9 Ah) |
Replacement tips
- Always replace all the batteries at the same time: a new battery combined with worn ones wears out very quickly.
- Switch off and unplug the UPS before working on it (except hot-swap models, according to the manual).
- Reuse the original cables, links and connectors and respect the polarity (red = +, black = −).
- Let the UPS fully recharge (about 8 hours) before relying on the runtime, then run a battery test.
- Used batteries must be taken to a collection point: they are recycled.