Genuine APC APCRBC117 replacement battery

Brochure commerciale APCRBC117

Brochure commerciale APC APCRBC117

Download (99.59KB)

---

APC APCRBC117 datasheet (French)

Schneider Electric / APC (PDF)

Download (217.27KB)

---

Ease of management
Network manageable	Provides remote power management of the UPS over the network via Powerchute Business Edition.
Compatible with InfraStruXure Manager	Enables centralized management via APC's InfraStruXure Manager.
SmartSlot	Customize the capabilities of your UPS with management cards.
LED status indicators	Gives a quick view of the power and unit status through visual indicators.
Serial connectivity	Allows the UPS to be managed via a serial port.
Availability
Scalable runtime	Allows the runtime to be increased quickly when needed.
Automatic internal bypass	Supplies mains power to the connected loads in the event of an overload or a UPS failure.
Hot-swappable batteries	Ensures continuity and quality of the power supply to the protected equipment while the batteries are being replaced.
Intelligent battery management	Maximizes battery performance, lifetime and reliability through an intelligent, precision charging process.
Temperature-compensated battery charging	Extends battery life by regulating the charge voltage according to the actual temperature of the batteries.
Automatic restart of loads after UPS shutdown	Automatically restarts the connected equipment when mains power is restored.
Protection
Power conditioning	Protects the connected loads against surges, spikes, lightning and other electrical disturbances.
Input power factor correction	Minimizes installation costs by allowing the use of smaller generators and cables.
Frequency and voltage regulation	Increases application availability by correcting abnormal frequencies and voltages without drawing on the battery.
Cold start capability	Provides temporary battery power in the event of a mains failure.
Generator compatible	Ensures a stable, constant supply of current to protect your equipment when a generator is used.
Safety agency approved	Ensures the product has been tested and approved as able to operate safely with the connected loads and within the environment.
Resettable circuit breaker	Easy recovery after a surge; no need to replace a fuse.
Ease of maintenance
Predictive failure notification	Provides an early-warning failure analysis function that allows components to be replaced proactively.
User-replaceable batteries	Increases availability by allowing a trained user to upgrade and replace the batteries, thereby reducing repair times.
Disconnected battery notification	Warns when a battery is not available to provide backup power.
Audible alarms	Reports changes in mains power and UPS conditions.
Automatic self-test	The battery self-test is performed periodically to ensure early detection of the need to replace a battery.
Adaptability
Flash-upgradable firmware	Firmware maintenance releases can be installed remotely via FTP.
Rack/Tower convertible	Protects the initial investment in the UPS when migrating from a tower environment to a rack environment.
Plug-and-Play external batteries	Ensures a stable, constant supply of current to the loads while the UPS runtime is being increased.

At Advanced Power Systems, we are committed to preserving the quality of the environment,
reducing waste and preserving our natural resources for future generations.

Every UPS that we repair or help to refurbish is one less that will end up growing our landfills.
Every battery is 97% recyclable and is a source of reusable lead.
Indeed, the lead is recovered, remelted and then refined. Once this process is complete, the recycled lead is reused to manufacture new batteries.
Lead is a precious mineral resource, and recycling it is far cheaper, both ecologically and financially, than extracting it. It is therefore an effective way of conserving natural resources and an important means of protecting our environment.

Every new replacement battery kit that we sell extends the life of your UPS for years, at a quarter of the price of a new unit.

Recycling service:

We will be happy to recycle all of your lead-acid batteries.

Our recycling program feeds the various components of used batteries back into the battery manufacturing process, recovering the hazardous lead and chemicals so that they can be reused safely.

Indeed, batteries contain lead, sulfuric acid and other chemicals that pose a health hazard and an environmental risk if they are not recycled properly. They therefore cannot be thrown away just anywhere.

Several options are available to you

You can send us your used batteries. (All shipping methods are accepted)

1. All you have to do is pack your used batteries safely.
2. Stick on the cut-out recycling image provided or available below.
3. Send them to the address shown on the label


You can go to an auto center, a garage, or a manufacturer or large retail store that sells batteries and drop them in the bins provided for that purpose.

You can also go to a waste collection center, which will know what to do with them.


At the end of the life cycle of your UPS units or your batteries, you can count on us to recycle them.

Be the first to ask a question about this product!