Our website is getting a makeover. Some pages may look different for a few days: orders and payments work as usual.
Our website is getting a makeover. Some pages may look different for a few days: orders and payments work as usual.
- New
Eaton 5P 1150i G2
- 1150 VA / 920 W tower UPS with Line Interactive technology, designed to protect servers and network equipment.
- Pure sine wave output and 8 C13 outlets to connect multiple devices.
- Automatic Voltage Regulation (AVR): input voltage range of 160 to 294 V.
- LCD display, USB and RS232 ports, 2-year warranty.
🔋 Replacement battery kit for this UPS
Battery kit for UPS EATON 5P 1150i G2 5P1150IG2 €52.96 excl. VAT€63.55 incl. VATView › The Eaton 5P1150IG2 UPS from the Eaton 5P Gen2 range protects your IT equipment against power outages and disturbances on the 230 V single-phase mains. With its power rating of 1150 VA / 920 W, it is designed to power servers and small IT infrastructures, in a tower format that can easily be placed on the floor or beside the equipment to be protected.
Key features
- Automatic Voltage Regulation (AVR): the UPS corrects voltage variations without drawing on the battery. The input range is 160 to 294 V, and the transfer threshold can be adjusted from 150 to 294 V.
- Pure sine wave output: suitable for sensitive IT equipment.
- 8 C13 outlets: to connect several devices to the same UPS, with a C14 input.
- Blue backlit LCD display: to monitor the UPS status at a glance.
- Communication: HID-compatible USB port, RS232 serial port, dry contacts and a slot for an optional communication card.
- Quiet operation: noise level below 35 dB at 1 metre, efficiency of 98.2%.
Intended use
This model is suitable for powering servers and network equipment on 230 V single-phase power. It is sized for a load of 920 W. Please note that extended runtime is not available and that the model does not offer redundancy: check these points if your installation requires long operating times.
Technical specifications
| Specification | Value |
|---|---|
| Brand / reference | Eaton 5P Gen2 / 5P1150IG2 (EAN 3553340710278) |
| Technology | Line Interactive (standby active) |
| Power rating | 1150 VA / 920 W |
| Input / output voltage | 230 V single-phase / 230 V single-phase |
| Input voltage range | 160 to 294 V |
| Output waveform | Sine wave |
| Input connector | 1 IEC-320-C14 inlet (10 A) |
| Outlets | 8 C13 outlets |
| Battery | Sealed maintenance-free lead-acid, 12 V / 9 Ah, 2 batteries supported, user-replaceable |
| Communication | USB + RS232, 1 optional card slot |
| Display | LCD screen |
| Form factor | Tower |
| Dimensions (W x D x H) | 150 x 345 x 233 mm |
| Weight | 11 kg |
| Efficiency at maximum load | 98.2% |
| Operating temperature | 0 to 40 °C |
| Warranty | 2 years |
- Type of use
- Server
- Technology
- Line Interactive
- Output Waveform
- SineWave
- Format
- Tower
- Power in VA
- 1150
- Power in Watts
- 920
- Width (mm)
- 150
- Display
- LCD screen
- Height (mm)
- 233
- Depth (mm)
- 345
- Weight (Kg)
- 11
- Input voltage
- 230V Single phase
- Output voltage
- 230V single-phase
- Expandable Autonomy
- No
- Redondancy
- No
- Additional card slot
- 1 slot
- Input connector
- IEC-320-C14
- Communication port(s)
- USB + RS232
- Warranty
- 2 years
Runtime according to the connected load
W
| Load (W) | Runtime |
|---|---|
| 45 W | 2 h 51 |
| 92 W | 1 h 24 |
| 137 W | 54 min |
| 184 W | 37 min |
| 229 W | 29 min |
| 276 W | 22 min |
| 321 W | 17 min |
| 368 W | 15 min |
| 413 W | 12 min |
| 460 W | 11 min |
| 505 W | 9 min |
| 552 W | 8 min |
| 597 W | 7 min |
| 684 W | 6 min |
| 736 W | 5 min |
| 781 W | 4 min |
| 920 W | 3 min |
Typical values provided by Eaton for part number 5P1150IG2. Actual runtime depends on battery age and temperature.
Sales documentation
Technical documentation
User manual
You might also like
Other UPS in the same range
Other UPS with the same power


