Eaton 9E 1000i Rack
Eaton 9E 1000i Rack – 2
Eaton 9E 1000i Rack – 3
Eaton 9E 1000i Rack – 4
Eaton 9E 1000i Rack – 5
Eaton 9E 1000i Rack – 6
Eaton 9E 1000i Rack – 7
Eaton 9E 1000i Rack – 8
  • New
Eaton 9E 1000i Rack
Eaton 9E 1000i Rack – 2
Eaton 9E 1000i Rack – 3
Eaton 9E 1000i Rack – 4
Eaton 9E 1000i Rack – 5
Eaton 9E 1000i Rack – 6
Eaton 9E 1000i Rack – 7
Eaton 9E 1000i Rack – 8

Eaton 9E 1000i Rack 2U

  • 1,000 VA / 900 W on-line double-conversion UPS.
  • 2U 19" rack, mounting kit (rails and brackets) included form factor.
  • Output: 4 x C13.
  • Hot-swappable batteries.
  • USB, RS232, network card slot, LCD.
9E1000IR
€551.31
Tax excluded
€661.57 tax incl.

 

The Eaton 9E 1000i Rack 2U UPS (part number 9E1000IR) is a 1,000 VA / 900 W on-line double-conversion UPS in a 2U 19" rack, mounting kit (rails and brackets) included form factor. It continuously supplies a stable, regulated and filtered sine wave, with zero transfer time during a power cut: the most complete protection for servers and sensitive equipment.

Key features

  • 1,000 VA / 900 W, regulated sine wave output.
  • Up to 90 % efficiency in double-conversion mode.
  • Outputs: 4 x C13.
  • Hot-swappable batteries, without powering down protected equipment.
  • Fixed runtime (no external battery module on this model).
  • USB and RS232 ports, slot for an optional network card, remote shutdown.
  • LCD to monitor UPS status and measurements.

What is it for?

For 19" racks in small IT rooms and network cabinets: it mounts in 2U with the supplied kit.

Technical specifications

General
Part number9E1000IR
RangeEaton 9E
Power1,000 VA / 900 W
Form factor2U 19" rack, mounting kit (rails and brackets) included
Dimensions (W x D x H)438 x 438 x 86.5 mm
Weight17.6 kg
Warranty2 years
Input
Nominal voltage230 V single-phase
Voltage range176 to 300 V (100 to 300 V with derating)
Frequency50 / 60 Hz
ConnectionC14 inlet
Output
TopologyOn-line double conversion
Output voltage230 V single-phase (200 / 208 / 220 / 230 / 240 V)
Power factor0.9
WaveformPure sine wave
Outputs4 x C13
Efficiency (online)90 %
BypassAutomatic internal bypass
Battery
TypeValve-regulated lead-acid (VRLA)
Batteries3 x 12 V / 7 Ah
ReplacementHot-swappable
Runtime extensionNo
Communication
PortsUSB (HID compatible), RS232 serial
Card slot1 slot for an optional communication card (network, relay)
DisplayLCD
Environment
Operating temperature0 to 40 °C
Noise level< 41 dB at 1 m
Compliance
Standards and certificationsIEC/EN 62040-1, IEC/EN 62040-2, CE

Source: Eaton specifications. Runtime depends on load, battery age and temperature.

Type of use
Server
Technology
ON-LINE Double conversion
Output Waveform
SineWave
Format
19" Rack
Power in VA
1000
Power in Watts
900
Width (mm)
438
Display
LCD screen
Height (mm)
86,5
Depth (mm)
438
Weight (Kg)
17.6
Rack
2 U
Rail kit included
Yes
Input voltage
230V Single phase
Output voltage
230V single-phase
Expandable Autonomy
No
Redondancy
No
Additional card slot
1 slot
Input connector
IEC-320-C14
Communication port(s)
USB + RS232
Bypass
Internal automatic By-Pass
Warranty
2 years
3553340710339
9E1000IR

Click here to leave a review


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)

Runtime according to the connected load

0016200324004860064800801000Load of the connected equipment (W)Runtime (minutes)90 W : 1 h 06180 W : 38 min270 W : 28 min360 W : 20 min450 W : 15 min540 W : 12 min630 W : 10 min720 W : 8 min810 W : 7 min900 W : 6 min
Internal battery

W

Load (W)Runtime
90 W1 h 06
180 W38 min
270 W28 min
360 W20 min
450 W15 min
540 W12 min
630 W10 min
720 W8 min
810 W7 min
900 W6 min

Typical values provided by Eaton for part number 9E1000IR. Actual runtime depends on battery age and temperature.

Product added to wishlist
Product added to compare.